Measuring weather

Measuring weather.

Definitions:

1. Anemometer: An anemometer is a device used for measuring wind speed and direction.
2. Beaufort wind scale: The Beaufort scale is an empirical measure that relates wind speed to observed conditions at sea or on land.


Anemometer
MATERIALS
1. Tape
2. Pin
3. Pencil
4. 4x Plastic dishes
5. 2x Wooded kebab sticks 

STEPS
1. You attached the plastic dishes onto the sticks
2. Attached the sticks into a cross, cellotape together
3. Attach a pin to the tape and grab a pencil and make sure it goes through the rubber on the pencil, and make sure it spins


Groups size: 5

Roles:

Timekeeper

Counter

Recorder

Anemometer Manager

Wind Manager

Mount the anemometer in a place that has full access to the wind from all directions.
When the time keeper says "Go", the counter in each group will count how many times the marked cup passes them in one minute and write it down.
Repeat the above step four (4) times and record the number of spins on the chart.

Place name on school grounds  &  Number of spins in 15 seconds
                                    
1. Field - 11
2. Old J Block site - 0
3. Grass hill in quad - 1
4. Tennis Court gate - 0

CONCLUSION:
The field was the windiest spot in all four spaces because, there's nothing blocking the air from getting to the air anemometer. In the middle of the field there are no trees and the air can easily get to the anemometer.

The tennis court gate has 0 spins because, there are trees blocking the air from getting to the anemometer, the wind kept on changing direction.

The old J block site had 0 spins because the construction gate had little holes and the air was going in all different directions, and not towards the anemometer to count how many spins there were.

The grass hill in quad had 1 spin because its high up and there were no trees blocking the airs way to get to the anemometer.